Femtosecond Ti:Sapphire Laser System
_ OPCPA SEED

The VENTEON | PULSE : ONE OPCPA SEED represents the ideal front-end oscillator for broadband few-cycle OPCPA systems. Based on the VENTEON | PULSE : ONE UB oscillator, the spectral bandwidth of this system allows for both, the generation of broadband few-cycle pulses as signal for the subsequent NOPA stage together with high power level @ 1030 nm for seeding an Yb-based amplifier serving as pump stage. Thereby both outputs are optical synchronized with respect to each other and their phase relation is preserved.

The broadband signal pulses still feature a pulse duration as short as 5.5 fs and can be optionally stabilized with respect to their CEP without additionally spectral broadening and with the typical CEP performance of the VENTEON oscillators.

The second output around 1030 nm provides exceptionally high energy > 30 pJ in a spectral bandwidth of 10 nm (FWHM) ideally suited as narrowband seed for the pump amplifiers. Optionally, the radiation coming directly from the VENTEON oscillator can be ordered with fiber pre-amplifier to deliver pulses with an energy > 1 nJ.


Specifications*


Oscillator Specifications as VENTEON | PULSE : UB
  • Spectral bandwidth > 400 nm (@ - 10 dBc)
  • Pulse duration < 6 fs
  • Average output power > 200 mW
  • Pulse energy > 2 nJ
  • Pulse energy > 30 pJ @ 1030 nm (10 nm FWHM)

Broadband OPCPA Output (after filtering):

  • Spectral bandwidth > 350 nm (@ - 10 dBc)
  • Pulse duration < 6 fs
  • Repetition rate: 80 MHz
  • Average output power > 150 mW
  • Pulse energy > 1.5 nJ
  • CEP-lock without additional spectral broadening (optional)
    SNR* for fCEO-beat > 30 dB (@ 100 kHz RBW**)

Pump-Amplifier Seed:
  • Center wavelength: 1030 nm
  • Spectral bandwidth: 10 nm (FWHM)
  • Spectrally filtered directly from the original VENTEON output spectrum
  • Pre-amplified for optimal amplifier seeding
  • FC/APC fiber port at the laser enclosure for easy seed pick-up
  • Average output power @ fiber port > 80 mW
  • Pulse energy (ampl.) > 1 nJ
  • Repetition rate: 80 MHz
  • Pulse duration < 200 fs (Fourier-limited)
  • RMS noise: 0.2 %




Technical Data:
  • Extended, all water-cooled breadboard design (LX) with space for pump laser, CEP stabilization optics and seed amplification
  • Increased stability due to integrated design within one laser enclosure
  • External KLM starter
  • Dimensions: 750 x 600 x 190 (mm-values)
  • Gross weight: ~75 kg (~166 lbs) / excluding pump laser and additional options



Fig. 1: VENTEON | PULSE : ONE OPCPA SEED spectrum. The red graph shows the original output spectrum whereat the blue graph shows the applicable spectrum after extracting the pump-amplifier seed radiation, see Fig. 3.

Fig. 2: Fourier-limited pulse of the VENTEON | PULSE : ONE OPCPA SEED of the applicable spectrum with a duration as short as 5.0 fs. The full original (unfiltered) output spectrum features a pulse duration as short as 4.5 fs.

Fig. 3: Extracted and amplified spectrum that can be used for direct seeding of an amplifier for pumping the OPCPA stage to amplify the spectrum depicted in Fig. 1.

Fig. 4: RMS noise of the extracted and amplified narrowband seed radiation shown for four hours.


*Specifications subject to change without notice due to technical developments.


Downloads:   VENTEON | PULSE : ONE OPCPA Flyer

For further information and your individual offer contact: info@venteon.com



© by VENTEON Laser Technologies GmbH                 [ Home ] [ Top ] [ Disclaimer ]